|
![]() |
| Standard with one line yellow/green backlit display |
|
An on board jumper selects either 5520 or 5645 KHz IF frequency to match your radio.
Another jumper enables TWEAK MODE which allows you to adjust the IF frequency to exactly match the carrier crystals in your radio.
Both the NORMAL IF frequency and the REVERSE IF frequency can be tweaked to provide accurate carrier frequency display for both sidebands on all bands.
C-Atlas is programmed for automatic band selection when the radio is operated in the amateur bands only. Display outside amateur bands may not be correct.
The mode, USB or LSB, is automatically displayed as a function of the band and NORMAL/REVERSE switch.
The signal to the C-Atlas is taken from Pins 2 and 3 of the external VFO input connector with gnd on pin 4. An 18pf capacitor couples VFO output to DFD using RG-174. leave the jumpers in place but tap the signals off the External VFO plug as shown below.

Power is available from Pin 8

PRICE $150.00 assembled tested with backlit display and TCXO options.
On-Line Instant order
A paypal account is NOT required
(shipping is included in paypal shopping cart value)
HOW TO ORDER
On-Line (click PayPal logo below)
By Phone with Visa/MasterCard
By FAX with Visa/MasterCard
253-931-1940
By Mail Almost All Digital Electronics, 1412 Elm St. S.E., Auburn, WA 98092